FiBO 200 – CONNECTOR INSPECTION INTERFEROMETERS
FiBO 200 – CONNECTOR INSPECTION INTERFEROMETERS
FiBO 200 Applications
-
Duplex SC, LC
-
Ribbon Fibers
-
Telecom Field Service
-
Specialty OE Interconnects
- Supplier qualification
- FiBO® 200 Interferometer
- Calibration targets
- USB 3.0 cable
- FiBO Code™ software
- Rugged case
Specifications are subject to change without notice.
Contact Optimark Fiber Optics Today to purchase the Fibo 200 (617) 232-6224
FiBO 200
FiBO 200 Interferometer is an economical solution for complete and accurate fiber optic connector endface testing. High-resolution 3D surface metrology and automated defect detection are combined in one robust, compact system for quick and easy inspection on the production floor or in the field.
System Features
- Comprehensive testing of PC and APC connectors and ferrules
- Radius of curvature, fiber height and apex offset measurements
- Automatic pass/fail defect analysis
- Quick, manual focus adjustment
- High-resolution imaging optics for accurate results
- Patented kinematic adapters for exact fiber positioning
- User-friendly FiBO Code™ software
- Compliance with IEC/TIA measurement standards
- Quick and easy ISO/NIST traceable calibration
- Accepts Fiber Ribbon Stage for ribbon fiber analysis
FiBO 200 Specifications
| Size | Height 5.1" (130mm) Diameter 3.35" (85mm) |
|---|---|
| Weight | 3.0 lbs (1.4 kg) |
| Optical source | 458nm LED |
| Optical magnification | 10x |
| On-screen magnification | 480x |
| Height resolution | 2nm |
| High resolution | 0.22 µm/px |
| Standard resolution | 0.45 µm/px |
| FOV diagonal | 450 µm |
| Connector adapters | FC/PC, FC/APC, LC/PC, LC/APC, LSH/ PC, LSH/APC, MU/PC, SC/PC, SC/APC, ST, 1.25mm, 1.6mm, 2.0mm, 2.5mm, 3.2mm Ferrules (custom adapters also available) |
| Accessories | FRS, VATS, BFC |
| Measurement technique | Non-contact, phase-shifting Michelson interferometer |
| Computer interface | USB 3.0 (cable included) |
| Power supply | Power supplied through USB 3.0 port |
| Software | FiBO Code™ (Windows® 7, 8, 10) |
| Radius of curvature (mm) | 0.1 / 0.25% mm |
| Apex offset | 0.5 / 1 µm |
| Fiber height (nm) | 1 / 1.5nm |